Wurth Bottle Surface Sealant ORANGE Medium 50g

Save 25%

Price:
Sale price£29.99 Regular price£39.99

Description

Wurth Bottle Surface Sealant ORANGE Medium 50g

0893574050

For sealing flanges and surfaces with minimum joints up to max. 0.5 mm. Replacement for solid seals.
High gap bridging

Completely smooths out surface roughness

100% seal

Gaps are filled completely, so that the resulting bonding provides protection against corrosion from friction and protection against rust.. Application area
Typical application is in the production of liquid seals on torsion-resistant flange joints, e.g. gear unit and motor housings etc. in the automotive and commercial vehicle industry, metalworking and tool manufacturing, shipbuilding, mechanical engineering and engine construction, electrical and electronics construction etc.

Application area

For sealing flanges and surfaces with minimum joints up to max. 0.5 mm. As a replacement for solid seals. Typical application area is the production of liquid seals on torsion-resistant flange joints, e.g. gear unit and motor housings etc. in the automotive and commercial vehicle industry, metalworking and tool manufacturing, shipbuilding, mechanical engineering and engine construction, electrical and electronics construction etc.

Instructions

This liquid plastic cures when in contact with metal in the absence of oxygen. The contact surfaces must be dry, dust-free and grease-free. Moisten the adhesive surfaces sufficiently and put them together immediately.

For more information, please refer to the technical data sheet.

Safety Data Sheet

Weight of content

50 g

Chemical basis

Dimethacrylic acid ester

Fully hardening/curing conditions

Exclusion of oxygen and contact with metal (copper or iron ions)

Colour

Orange fluorescent

Min./max. viscosity 1 /conditions 1

100000-180000 mPas / at 25°C, Brookfield RVT, spindle 6/2.5 rpm

Density/conditions

1.05 g/cm³ / in accordance with DIN EN ISO 2811-1

Min./max. initial strength

10-20 min

Min./max. functional strength

3-6 h

Min./max. final strength

6 h-24 h

Min./max. processing temperature

5 to 35 °C

Min./max. temperature conditions

-55 to 150 °C

Min. flashing point

100 °C

Min. prevail torque

5 Nm

Conditions for prevail torque

DIN EN 15865

Min./max. compressive shearing strength /conditions

5-10 N/mm² / in accordance with ISO 10123

Min./max. tensile strength /conditions

8-10 N/mm² / in accordance with DIN 53288

Min./max. shear strength

5-10 N/mm²

Conditions for tensile shear strength

in accordance with ASTM D-950

Min. breakaway torque

8 Nm

Breakaway torque conditions

DIN EN 15865

Shelf life from production/conditions

18 Month / at room temperature

Silicone-free

Yes

Solvent-free

Yes

You may also like

Recently viewed