Wurth Adhesive for Plastic SUPER FAST 50ml REPLAST

Save 20%

Price:
Sale price£19.95 Regular price£24.99

Description

Wurth Adhesive for Plastic SUPER FAST 50ml REPLAST® Easy plastic repair system

An adhesive for virtually every type of plastic

Can be used for repairs and structural bonding
Special positive mixer

08935005

SUPERFAST

  • No need for inconvenient use of different types of adhesive
  • Optimum mixing with minimum volumes
  • Low adhesive loss (waste)
  • Quick to harden
  • Further work, such as sanding, is possible within an extremely short period of time
  • Excellent chemical resistance
  • Resistant to a wide range of liquids, such as petrol, many lubricating oils and ethyl acetate
  • Solvent-free

For REPLAST® Easy plastic repair system

  • Contents: 50 ml
  • Chemical basis: Two-component polyurethane
  • Processing time: 30 s
  • Colour: Black
  • Density: 1.288 g/cm³
  • Min./max. processing temperature: 15 to 25 °C
  • Min./max. temperature resistance: -30 to +100 °C
For REPLAST® Easy plastic repair system

An adhesive for virtually every type of plastic

  • No need for inconvenient use of different types of adhesive
  • Can be used for repairs and structural bonding



Application area
  • Vehicles
  • Spoilers, radiator grills, panel clips, bumpers, brackets on headlights and radiators etc.
  • HGVs and coaches/buses
  • Aprons, bumpers, air intake pipes, wheel arches etc.
  • Motorcycles
  • All panelling
Instructions

The substrate must be capable of bearing loads and must be clean, dry and free from grease and rust. Old adhesive residues must also be removed. To do so, clean the surface with the plastic cleaner and apply the primer. The flash-off time must be observed. Discard some adhesive before screwing on the mixer nozzle. The first 2 cm of adhesive from the mixer nozzle should also not be used. When applying the adhesive, the mixer should remain in the adhesive to prevent bubbles forming. Observe the work instructions.

Contents

50 ml

Chemical basis

Two-component polyurethane

Processing time

30 s

Colour

Black

Density

1.288 g/cm³

Min./max. processing temperature

15 to 25 °C

Min./max. temperature resistance

-30 to +100 °C


Product information

Catalogue page as PDF 1

Safety data sheet 1

Certificates/Documents (3)

You may also like

Recently viewed