Wurth Adhesive for Plastic Bodywork 50ml REPLAST® Universal

Save 20%

Price:
Sale price£19.95 Regular price£24.99

Description

Wurth Adhesive for Plastic Bodywork 50ml REPLAST® Universal Easy plastic repair system
An adhesive for virtually every type of plastic

08935004

An adhesive for virtually every type of plastic

  • No need for inconvenient use of different types of adhesive
  • Can be used for repairs and structural bonding

Special positive mixer

  • Optimum mixing with minimum volumes
  • Low adhesive loss (waste)

Quick to harden

Further work, such as sanding, is possible within an extremely short period of time

Excellent chemical resistance

Resistant to a wide range of liquids, such as petrol, many lubricating oils and ethyl acetate

Solvent-free

Notice

There may be adhesion problems in individual cases due to the coatings and release agents used in some cases in the plastic production process. Not suitable for PE (polyethylene), PP (polypropylene) or PTFE (polytetrafluor ethylene) plastics. Check material compatibility on an invisible area if necessary.

Application area

Cars:

Spoilers, radiator grills, panel clips, bumpers, brackets on headlights and radiators etc.

HGVs and buses:

Aprons, bumpers, air intake pipes, wheel arches etc.

Motorcycles:

All panelling

Wurth Adhesive for Plastic Bodywork 50ml REPLAST® Universal Instructions

The substrate must be capable of bearing loads and must be clean, dry and free from grease and rust. Old adhesive residues must also be removed. To do so, clean the surface with the plastic cleaner and apply the primer. The flash-off time must be observed. Discard some adhesive before screwing on the mixer nozzle. The first 2 cm of adhesive from the mixer nozzle should also not be used. When applying the adhesive, the mixer should remain in the adhesive to prevent bubbles forming. Observe the work instructions.

You may also like

Recently viewed