Description
Wurth Bottle Surface Sealant HIGH Strength GREEN Bearing Locking 50g
0893603050
Reliable hardening at low temperatures around 0°C.
A reliable aid, even in winter.
Maximum gap-filling power of 0.15 mm
Even very large deviations can be corrected without significant expense.
Prevents frictional corrosion
The bearings will not seize up.
Resistant to a large number of bases, gases, solvents, oils and fuels
DOS system:
- Practical one-handed use thanks to the clever turn lock.
You always have one hand free.
- Infinitely adjustable dosing system enables dispensing to be adjusted to suit the application, and to keep consumption and costs to a minimum.
- No residue material in dispensing neck
Costs optimised thanks to emptying with virtually no remaining product
|
Chemical basis |
Methacrylic acid ether |
|
Colour |
Green |
|
Density |
1.07 g/cm³ |
|
Suitable for max. thread |
M12 |
|
Max. gap-filling ability |
0.15 mm |
|
Min./max. initial strength |
5-10 min |
|
Min./max. functional strength |
30-40 min |
|
Min./max. final strength |
3 h-6 h |
|
Min./max. viscosity /conditions |
100-200 mPas / at 25°C, Brookfield RVT, spindle 2/20 rpm |
|
Compressive shearing strength conditions |
in accordance with ISO 10123 |
|
Min./max. processing temperature |
5 to 35 °C |
|
Min./max. temperature conditions |
-55 to 150 °C |
|
Min. flashing point |
90 °C |
|
Shelf life from production/conditions |
18 Month / at room temperature |
|
Weight of content |
50 g |
The following plastics can be affected in the event of prolonged exposure: ABS, celluloid, polystyrene, polycarbonate (Macrolon), PMMA (Plexiglas), polysulfone, SAN (lurane, Tyril), Vinidur, vulcanised fibre, and painted surfaces. We always recommend that you conduct your own tests.
For high-strength fastening of cylindrical joining parts, such as bushings and sleeves in as-delivered condition, ball bearings, oil-impregnated sintered bronze, gears, bolts, shaft and hub connections that are exposed to high loads.
The bearing lock is for use in the automotive and commercial vehicle industry, in metalworking and tool manufacturing, shipbuilding, mechanical engineering and engine construction, and electrical and electronics construction.
This liquid plastic cures when in contact with metal in the absence of oxygen. The contact surfaces must be dry, dust-free and grease-free. Moisten the adhesive surfaces sufficiently and put them together immediately.
For more information, please refer to the technical data sheet.